06-08-2015 06:15 PM - edited 06-08-2015 06:19 PM
I set up access to the Canon Remote UI Management Mode (Portal) using my IPv4 address so that I could make changes to the settings of my imageCLASS MF6160dw directly from my Desktop Computer.
That has worked flawlessly for almost 3 months.
Then, all of a sudden 3 days ago, I started getting this message: This page can't be displayed
I have not added nor removed any equipment or software to my Desktop Computer.
I also reconfirmed that my IPv4 address was correct.
And I try to access the "Portal" numerous times at different times of the day & on different days.
My Desktop Computer is a Dell XPS 8700 Special Edition running Windows Pro 8.1 (64-BIT)
How can I regain access to the "Portal"?
Solved! Go to Solution.
06-29-2015 03:04 PM
06-29-2015 03:04 PM
01-08-2019 01:47 PM - edited 01-08-2019 01:49 PM
That is part of your problem. Your copier should be a fixed IP address. If you can't access the UI by name or by name from your printer settings.
If you have a small company place all your printers starting at .100
You can to this in the copier under network settings or do it at your DHCP server (wherever that is located for you)
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.