10-16-2024 06:20 PM - last edited on 10-16-2024 08:38 PM by Tiffany
My IP 100 has functioned all the years perfectly, but now it reports 'no paper' but there is paper in the tray! After the initialising of the printer (normal sequenz, head is shifting right left) The orange starts to flash twice even there is paper in the tray and also not any paper jam. I cant find apaper sensor to fit it. I am very sure it will work fine still if it would only accept the paper!!!!
Any ideas or suggestions
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.