10-17-2012 04:52 PM - edited 10-17-2012 06:08 PM
I thought this would be a good thread for everyone to come in and tell a little about yourself, especially as the forum is just getting started.
My name is Michael Andrew, but I go by Michael The Maven. I have been a Canon shooter for almost 10 years now and I LOVE Canon gear.
I started off primarily as a portrait and wedding photorgapher, after a few years of working as a videographer in the wedding industry in Alabama. For the past 5 years, I have run a free online photography school for beginning Canon shooters and have have produced several Canon training videos, many clips of which can be seen on Youtube. I am intimiately familiar with the following Canon gear:
Canon Rebel XSi
Canon Rebel T1i
Canon Rebel T2i
Canon Rebel T3i
Canon Rebel T4i
Canon 40D
Canon 50D
Canon 60D
Canon 5D
Canon 7D
Canon 5Dii
Canon 5Diii
Canon Speedlite 430, 580 Ex, Exii
Canon Speedlite 600
I look forward to meeting everyone and sharing my knowledge with you if I can help!
Michael
04-20-2019 10:26 PM
Wrote back a long note and took too long and disappeared.
You have many opportunites to find a source that suits you to learn it all. You'll get it, keep your enthusiasm. Can be overwhelming, but so is flying.
Surely youll be a pro in no time.
I thank God for ppl like you with neves of steel.
Best wishes
04-22-2019 01:39 PM - edited 04-22-2019 02:13 PM
Nerves of steel; knees of jelly.
Thanks for the encouragement: last night was a disaster, photographically speaking.
04-23-2019 12:37 PM
May I offer a suggestion that is really helping me? Im real new at th is too, on my 2nd dslr.
CreateLive has classes on almost every camera out there. John Greengo (Canon photographer/ instructor, also work/s/ed for Canon) is excellent at going thru EVERY setting on your camera and explaining in detail each function. He offers different scenarios/ different conditions and how to maneuver the settings on the go. Once I knew what the settings did and how to work it, my stress level decreased, esp when out on an excursion (of sorts) or events you want to catch, and your under pressure to get it right.
Its like learning CPR every yr, once you know it, and practice it, becomes automatic without needing to stop and think...get more stressed and start messing up etc....Surely we have all been there.
If you can handle the kind of stress of engine failure during a transport flight, you WILL get this. Those disasters will make you better at it b.c now you will investigate what it was that went haywire. (we're stil talking photos not flight) lol we hope anyway.
I did transports for a month. I was not the pilot, but the caregiver. That alone is stressful, esp if patient not stable. You had engine/ electric issues on top of an already stressful situation. All I can say is....Nerves of steel....Nobody sees the jelly knees or the knots in your stomach (lucky for us)
05-08-2019 10:25 AM
Hey everyone!
I’m Saurabh. I’m 27 years old, and I’m a native Indian. I work as an SEO Consultant in an IT firm and a Part-time blogger
I’m happy to be here at Canon Community,
01-02-2020 11:20 PM
@fatcat wrote:...CreateLive has classes on almost every camera out there. John Greengo (Canon photographer/ instructor, also work/s/ed for Canon) is excellent at going thru EVERY setting on your camera and explaining in detail each function...
Thank you. I'll check it out.
05-09-2019 01:55 PM
Hi Everyone.
My name is Shane, I live in Las Vegas, and I have a Canon Rebel XTi that I've had for years. My primary interest is nature photography.
I'm looking forward to learning from everyone here.
06-12-2019 06:00 AM - last edited on 06-12-2019 09:09 AM by Porcha
Hi Canon
I’m Anil Kumar. I’m a photographer living in Chandigarh, India. I am a fan of photography, writing, and arts. I’m also interested in education and fashion.
with regards
(Link removed as per forum guidelines)
06-18-2019 02:22 PM - last edited on 06-18-2019 02:25 PM by John_B
Hello, I'm a newbie for travel photography, I used to be a filmmaker. I am working for a travel agency in Vietnam name Du Lịch Hoàn Mỹ.
06-18-2019 04:01 PM
sounds like fun making your movie and travel photos.
Dont expect much of a response on your posted photos on here tho. The moderaters RARELY comment unless is OBVIOUSLY done by a pro that has been phtooshopped to death.
ANd if you say anything remotely NEGATIVE about them, they pull your comments down.
Im DONE with Canon after sending in my camera for repair. THey have had it over a month and NONE of the things were done to that I asked for on my form. CLEANING Was included, but they ONLY replaced the mother board and didnt even check if that fixed the focus issue.
Good luck. CANON SUCKS
they came out with the M5 everywhere but the US, and now too LITTLE TOO LATE for many who have gone over to Sony mirrorless.
They are HEMORAGING money to catch up, and not doing a very good job. They are more concerned with selling me a new camera than to fix my problems. The sales lady also was PUSHING the 80d and told me it was a FULL FRAME camera, which is NOT. 80d has apc-cmos sensor. BUNCH of IDIOTS running the place and they deserve to fall behind. I WILL NEVER BUY ANOTHER CANON PRODUCT AGAIN
01-08-2020 04:13 PM
Hi to All!
I've been using Canon cameras, lenses, printers, scanners, etc. since the days of the original 35mm Rebel. There have been many upgrades since then. The big push to go digital came about when I opened the back of my EOS Elan 7E as the film was rewinding. Ended up losing what I believe were some great whale watching photos. Still have the 7E but not the Digital Rebel that replaced it.
I'm looking forward to learning more from everyone and perhaps sharing when I feel I can help out.
Bob Fahrenholtz
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.