02-21-2024 01:25 AM
Hello,
The info button on my R5 will not toggle through screens. Is there any way to fix this`
Solved! Go to Solution.
02-21-2024 02:40 AM
Thank you for your reply - while going through the menus (again) I discovered that only one option was checked and once I checked the others the toggling worked as it should!
02-21-2024 02:37 AM
@sular wrote:Hello,
The info button on my R5 will not toggle through screens. Is there any way to fix this`
Which display screen mode? Image Playback? Viewfinder display for capturing photos? Rear panel display for capturing photos? And there are more information display modes.
All of the display modes are completely programmable. The button can be programmed to toggle between different displays or be limited to only one. The button itself can even be “locked” from use!
One possible resolution is to reset the camera back to factory defaults. But before you do, try switching the top mode dial to Automatic and see if the [INFO] functions as it should.
02-21-2024 02:40 AM
Thank you for your reply - while going through the menus (again) I discovered that only one option was checked and once I checked the others the toggling worked as it should!
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.