10-27-2016 05:53 AM
I have enabled live view by pressing the Start/Stop button, and the picture shows on the LCD monitor. I then take a shot. But nothing is recorded on the card, and the picture dos not show on the LCD monitor (instead it just keeps showing the live view). There must be a simple explanation and solution?... i tried to reset all options and i have the same probleme .and its new d5 mark3 i used this camera for 2 month only
10-27-2016 09:41 AM
Does the camera believe it has been able to lock focus on a subject? In "One Shot" mode it wont take a photo until it believes it has achieved focus.
As a test, try switching the auto-focus switch on the lens over to manual (set AF/MF to MF) and see if it actually takes and records the shot when you press the shutter button. If so, it likely points to a focus issue.
10-27-2016 10:03 AM
That sounds like it's in Video mode.
10-27-2016 10:25 AM
@cicopo wrote:That sounds like it's in Video mode.
It does, but it would still capture a photo, though. I've had that switch accidentally changed position on me, and the camera winds up taking 1040P snapshots.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.