cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

canon eos rebel t3 no longer connects to eyefi mobi card

ahhalperin
Contributor
i have done a hard reset of my camera, re-enabled the connection, but still does not connect tl the card and transmit WiFi signal so i can transmit images
17 REPLIES 17

both the old and new EYEFI cards continue to function satisfactory
and images are stored normally. They do not transmit wirelessly as they should. That is my problem


@ahhalperin wrote:
both the old and new EYEFI cards continue to function satisfactory
and images are stored normally. They do not transmit wirelessly as they should. That is my problem

Have you tried resetting the camera?  Your preconceptions are prohibiting [you] from considering the problem objectively.

 

Last call, have you tried a regular card, yet?  If not, then when?  If you think there is something wrong with the camera, then prove it.

--------------------------------------------------------
"The right mouse button is your friend."

Are you sure you have EyeFi enabled?

 

Capture.JPG

 

All the camera does is be sure not to shut off while images are being transfered. It does not control the EyeFi card. Are you sure the card is enabled correctly in the EyeFi desktop app?

 

 

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

enabled

jrhoffman75
Legend
Mobi card
John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

yes, mobi card

jrhoffman75
Legend
I'm at a loss. My Mobi Pro uploads to my iPad just fine.

I really do not think its a camera issue since all the camera setting does is keep camera from shutting off while EyeFi is sending.

I tested it with my 1D Mark IV and it works fine when I enable Power Off to never.

If you are trying to upload to PC it must be a WiFi issue or a bad card.
John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

treied it again, and it worked.

We mjust have scared it.

Use a mac

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.