02-09-2014 09:50 PM
Does anyone know why the bottom half of my focus points are blurry/bleeding
02-10-2014 11:34 AM
I don't know why but if it is working I would not be concerned. I have a 5D that has "bright" focus squares and it works fine.
02-10-2014 10:41 PM
Sounds Fair. Thank you for your input 🙂
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R5 - Version 2.1.0
EOS R6 - Version 1.9.0
EOS R3 - Version 1.8.0
EOS R7 - Version 1.6.0
EOS R10 - Version 1.6.0
EOS R6 Mark II - Version 1.5.0
EOS R8 - Version 1.4.0
EOS R50 - Version 1.3.0
EOS R100 - Version 1.1.0
Powershot V10 - Version 1.3.0
07/01/2024: New firmware updates are available.
CR-N700 - Version 1.4.0
CR-N500 - Version 1.5.0
CR-N300 - Version 1.5.0
CR-N100 - Version 1.1.0
CR-X300 - Version 1.3.0
RC-IP1000 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
![IMG_0402[1].JPG](https://community.usa.canon.com/t5/image/serverpage/image-id/3845i563F9CFEE87DC758/image-size/original?v=mpbl-1&px=-1 "IMG_0402[1].JPG")
