01-26-2024 11:52 PM
I recently got an R7 and noticed today that I cannot manually set the shutter speed to be any slower than 1/125. I updated the firmware (v1.4.0) and the problem persists. I'm on manual camera mode and can change all other parameters as expected. This happens regardless of lens choice, ISO, aperture, shooting mode, etc. I am not using a flash.
Any idea what's going on here?
01-27-2024 12:20 AM - edited 01-27-2024 12:31 AM
If you are using auto ISO, look at the minimum shutter speed to see if it has accidently been set to 125. Also, take a look at your shutter speed defaults in the custom functions menu (pg. 860 in the manual).
Newton
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.