I’m using a remote trigger via the shutter release port. After image capture, the LCD screen only shows the horizon level indicator, but no preview of the taken image. The only way I can see the image I’ve taken is to unplug the cable to the remote trigger. How can I see the image preview without having to do this after every capture? I'm using an EOS 5D MkIV.
Solved! Go to Solution.
Just tried this with my 5D IV with the RS-80N3 and couldn't reproduce the issue.
Capuring an image via the remote always put up the capture briefely on the LCD screen. I then pressed INFO until the level was displayed. Took an image via the remote and it briefly showed on the LCD. Then the level showed again. Pressed INFO one more time to return to the Quick settings display. Third image captured, showed briefly on the LCD screen.
Having said all that, I was in Manual mode, and shutter set to 1/200 (i.e. something other than Bulb).
As soon as I attach the remote cable to the receiver, the LCD screen shows the level indicator, and all buttons on the left are disabled.
Im not using the RS-80N3 cable release. I'm using a Vello Freewave wireless trigger.
09/26/2023: New firmware updates are available.
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
03/30/2023: New firmware updates are available.