04-25-2020 11:38 AM
I am new user and stuck on manual mode, where my camera doesn't allows me to change Aperture and Shutter speed, However ISO can be altered.
I don't know either I messed up with setting or what. I had been pulling off my hair this whole time.
Please help or else I'll go bald.
04-25-2020 11:48 AM - edited 04-25-2020 12:09 PM
The display shows P and the mode dial shows M. If the display shows P the mode dial should also show P. Have the mode dial plate felt off before and you have glued it back wrong? I had to glue back the plate on one of my 6D cameras.
04-25-2020 12:53 PM
04-25-2020 12:55 PM
04-13-2021 08:39 PM
04-15-2021 04:06 AM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.