cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Help please - EOS 90D Repair

EJScott
Apprentice

Hello all,

I'd greatly appreciate guidance on a dependable and reasonably priced place to have the shutter assembly replaced on my 90D.

Thank you!

E. J.

8 REPLIES 8

p4pictures
Whiz
Whiz

A Canon service centre would be the logical choice. 


Brian
EOS specialist trainer, photographer and author

Thanks but I'm looking for something much more specific. Preferably a first hand experience recommendation. 

You probably need to provide some info on where you live. 

John Hoffman
Conway, NH

1D X Mark III, M200, Many lenses, Pixma PRO-100, Pixma TR8620a, Lr Classic

Thank you. I live in Southern California. However, of course, I can ship the camera anywhere on the little blue marble.  🙂

Except shipping and insurance can be expensive. Maybe some of our SoCal members can provide info. 

John Hoffman
Conway, NH

1D X Mark III, M200, Many lenses, Pixma PRO-100, Pixma TR8620a, Lr Classic

A Canon USA Factory Service Center is located in Costa Mesa California according to the repair booking forms.


Brian
EOS specialist trainer, photographer and author

shadowsports
Legend
Legend

+1 what Brian said.  If Canon is close by, it's the best bet.  If you live near Sammy's, that's another good one.  

https://www.samys.com/stores?keyword=samy%27s%20camera&campaign={Branded}&gad_source=1&gclid=CjwKCAj...

https://www.samys.com/repairs?gad_source=1&gclid=CjwKCAjwr7ayBhAPEiwA6EIGxIMinlo2oXpk4Mm1frlrCTjnKvu...

I'd still go to Canon first if I could.

~Rick
Bay Area - CA


~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It

I'd like to sincerely thank everyone for taking the time and investing the effort to respond. So very kind of you all! 😊

I disassembled the camera and repaired it myself. Of all things an Argentine ant had gotten into the shutter plates and got squished in the corner which was buckling one of the plates and not allowing the other plates to close. I dissembled it, pulled out the shutter assembly, removed the remains of the ant, cleaned the plate slots and it's just as it was. Yay!

Thanks again for the responses.

E. J.

Announcements