05-28-2017 06:57 AM
Doe aan astrofotografie al een tijdje. Plotseling zijn mijn Isowaardes tussen 100 en 6200 te donker (zelfs overdag donkere foto's) Alle instellingen gebrobeerd en zelfs fabrieks instellingen ingesteld. Alle persoonlijke instellingen gewist.
Het vreemde is dat hij bij filmen wel genoeg licht geeft. Ik kan niet vinden wat het probleem is. Help? DAnk U!
05-28-2017 09:32 AM
Hi Marianp. This is Canon USA user forum. Looks like you have written in Dutch. If you can repost in English we can try to help.
05-28-2017 10:45 AM
I hads lots of fun with my Canon 600D with night- and astro fotography. Recently however I cannot change between 100 and 6200 ISO. It's stays very dark and for me these differences are very needed when fotographing through my telescope. While I was trying changing all the settings I once had a H added to my ISO that worked, but only very light. I tried all the settings and even erased all settings to firmsettings etc. etc. Nothing works. The funny thing is that while filming I do get enough light.
I so hope you can help me. As I cannot afford another camera
Thank you in advance,
05-28-2017 10:59 AM
You did reset to Canon factory defaults? Beyond doing that with out success, I believe the camera is broken. Remove the battery for an extended amount of time. Like a week, or longer, for instance and see if it completely resets. I don't believe there is a 'keep alive' battery in a T3i Rebel. If there is remove it also.
The 'H' is a pushed ISO setting.
05-28-2017 11:24 AM
What is the position of the shooting mode dial on the top of the camera? You probably want to use M, manual mode.
05-28-2017 06:04 PM
Thank you for your reply. I will try leaving out my battery as you advise me, not being able to use my camera terrible but necessary.
Hope it works
05-29-2017 09:04 AM
"You did reset to Canon factory defaults?"
It is fruitless for everyone to 'guess' what may have been set wrong or whether your camera is faulty until you have reset it to factory defaault. After you get it reset then you really do need to read and understand how to set things. You will then know if you did do something. But reset it first.
05-29-2017 10:10 AM
Resetted several times. Did not work. Somebody advised me to leave the battery out for a week.
What surprises me is that when I put the video on, I DO have enough light.
05-29-2017 10:21 AM
What are the exposure settings when you are "filming" the night sky?
05-29-2017 03:43 PM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.