04-18-2022 09:02 AM
I have the content creator kit EOS M50 Mark 2 and I can't get my Lense to pop out. It just stopped working and now I can't zoom in and out. Can someone help!!!
04-18-2022 05:54 PM - edited 04-19-2022 12:57 AM
Hi LeahAnn, welcome to the forum:
First, what lens are you using???
If it is, as I suspect the EF-M 15-45 lens, you may recall that you had to press a catch on the side of the lens to allow it to open, so it could be used. You have to repeat that procedure to be able to close it back up again. When the lens has been collapsed back into its 'parked' state you can then remove the lens as per normal for Canon cameras: HERE
NOTE: you should never remove a lens from the camera with it still powered on. This will attract dust onto your sensor and show as marks on your images.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.