06-28-2024
08:51 AM
- last edited on
06-28-2024
09:10 AM
by
Danny
I have a Canon T8i.
Lately, I have begun to notice that after the shutter closes, my display seems to give a little jerk down and to the left. It doesn't seem to affect the quality of the photo.
There doesn't seem to be any camera movement in the final product, but I'm getting a little concerned.
Is this normal?
Steve Thomas
06-28-2024 09:01 AM
Far from an expert but that doesn't seem normal. I have a T7 and nothing like that happens.
06-28-2024 09:18 AM
What lens? Sounds like an IS glitch. Do you have another lens to try?
06-28-2024 10:13 AM
Kvbarkley,
I'll give that a try.
I should add that this behavior seems to be confined to only Live View shooting. I'm not a scientist or a technician, but I suspect it has to do with the mirror dropping back down into place.
Steve Thomas
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.