07-25-2024
09:01 AM
- last edited on
07-26-2024
10:04 AM
by
Danny
I have a Canon Rebel t7i. I recently purchased a wireless lavalier microphone. Whenever I connect it to my camera and use it for a video, the video's audio contains a loud whine that only cuts out when someone is speaking into the microphone. The audio sounds great when I use the microphone in a video taken by a phone or a laptop, so I don't think the microphone is defective. Any ideas on how to get it to work well with my camera?
07-25-2024 09:07 AM
You might want to check if there is an automatic gain control (AGC) setting and disable it. Use manual level controls. Often during quiet segments of audio AGC circuits will increase the gain and the noise that is normally not audible.
07-25-2024 09:09 AM
Thank you for your response! I will try that.
08-06-2024 08:32 AM
Thank you so much for the help.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.