09-02-2024
12:55 PM
- last edited on
09-03-2024
08:56 AM
by
Danny
So I recently purchased a godox x3 s trigger for my sk400ii. It connects to my strobe fine but won’t trigger when I shoot on my camera (eos rebel t7). It seems that it’s not even connected to my camera at all when I slide it into the hot shoe, I believe that may be the issue. I’m not sure what I’m doing wrong, should I try an adapter? I’m pretty new to the game honestly, any help would be much appreciated!
Solved! Go to Solution.
09-02-2024 03:54 PM - edited 09-02-2024 03:57 PM
If you exchange the X3S for a X3C, you will probably be alright.
The Godox X3C is compatible with the Canon E-TTL II system. Most 3rd party E-TTL units wil also work with a T7 that lacks the center flash pin.(but not always)
09-02-2024 03:54 PM - edited 09-02-2024 03:57 PM
If you exchange the X3S for a X3C, you will probably be alright.
The Godox X3C is compatible with the Canon E-TTL II system. Most 3rd party E-TTL units wil also work with a T7 that lacks the center flash pin.(but not always)
09-02-2024 04:03 PM
Hoping that’s the case! Thank you!
09-02-2024 05:26 PM
Thanks Mike!!
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.