cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

EOS Rebel SL3 Dark Circles on Photos

Susan588
Contributor

355FB06C-6B3D-4729-8747-D7F6CAA26C5B.jpeg

DEFCAE76-A28D-4619-8646-4CF20E49B06C.jpeg

Happy Friday! I purchased an SL3 in 2019, but I haven't used it a lot, since I have mostly been home for the last couple of years. I have an issue with random shadow-looking dark rings appearing in my photos. My lenses are compatible with the camera and are all Canon EF or EF-S. I've search the forum but only found an issue with third party lenses that didn't look like this one. I'm attaching an example, and sometimes is much more prominent than this one. Is it a setting or anything I can fix? I'm hoping it's not a defective camera since it's out of warranty. Thank you. 

2 ACCEPTED SOLUTIONS

wq9nsc
Authority
Authority

It looks like a hair or similar sitting loosely on the surface of the sensor.  Look in your manual (the advanced user guide which you may need to download from the Canon website) for manual sensor cleaning and follow the instructions to look carefully for anything stuck to/directly in front of the sensor.  NOTE!!!  Be sure to have a fully charged battery in the camera for this because you don't want to have the battery expiring and the mirror moving back into position.  Use a lens blower to remove anything sticking to the sensor.

Rodger

EOS 1DX M3, 1DX M2, 1DX, 5DS R, M6 Mark II, 1D M2, EOS 650 (film), many lenses, XF400 video

View solution in original post

i agree with rodger that it might be a hair or eyelash.  use a camera specific blower and not anything with compressed air can.


-jaewoo

Rebel XT, 7D, 5Dm3, 5DmIV (current), EOS R, EOS R5 (current)

View solution in original post

16 REPLIES 16

Peter
Authority
Authority

More visible at 1/4000 sec than 2 sec? Then it is a failing shutter.

It is more visible at faster shutter speeds. I don't have the issue with pictures of the moon, etc. Thank you. 

Checked your pictures again. Indeed it is a circle. I just saw the half of it before. You can try with auto ISO, f/14 and just change shutter speed.

Have you also taken a look at the sensor so that nothing is laying on it?

jrhoffman75
Legend
Legend

Can you post an "out of camera" file to Dropbox or One Drive?

 

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

wq9nsc
Authority
Authority

It looks like a hair or similar sitting loosely on the surface of the sensor.  Look in your manual (the advanced user guide which you may need to download from the Canon website) for manual sensor cleaning and follow the instructions to look carefully for anything stuck to/directly in front of the sensor.  NOTE!!!  Be sure to have a fully charged battery in the camera for this because you don't want to have the battery expiring and the mirror moving back into position.  Use a lens blower to remove anything sticking to the sensor.

Rodger

EOS 1DX M3, 1DX M2, 1DX, 5DS R, M6 Mark II, 1D M2, EOS 650 (film), many lenses, XF400 video

Rodger, I ordered a blower and followed the instructions in the manual. I've taken a few test shots, and I think it's finally gone. Thanks to you and everyone else for the help. 

Susan,

Glad to hear you have it working as intended again!

Rodger

EOS 1DX M3, 1DX M2, 1DX, 5DS R, M6 Mark II, 1D M2, EOS 650 (film), many lenses, XF400 video

Susan588
Contributor

Thank you all very much! I'll get a lens blower and try to clean the sensor. 

i agree with rodger that it might be a hair or eyelash.  use a camera specific blower and not anything with compressed air can.


-jaewoo

Rebel XT, 7D, 5Dm3, 5DmIV (current), EOS R, EOS R5 (current)
Avatar
click here to view the press release
Announcements