04-05-2024 10:10 PM - last edited on 04-05-2024 11:15 PM by Tiffany
Just purchased a new Canon 90D through Amazon. I was watching a tutorial on the 90D but found that my 90D does not have ‘Metering timer’ or ‘Expo simulation’ options in the menu where the instructors’s camera does. Any ideas or suggestions why my camera doesn’t have these options?
Solved! Go to Solution.
04-06-2024 08:49 PM - edited 06-21-2024 01:27 PM
Start by putting you camera in P mode, and go to the menu. In the camera icon menu (red) on page two both can be found. The information is on page 220 and 221 of the 90D manual.
R3 ~ R5 ~ R6 Mk II ~ R50
Lenses: RF Trinity and others
Adobe and Topaz Suite for post processing
Personal Gallery
06-21-2024 11:33 AM
I could be wrong, but I think you have to put your camera in Live View, and then go look at your menu settings.
Steve Thomas
11-15-2024 11:50 AM
This....this is the answer....you are a savior.....Thank you
06-21-2024 01:29 PM
Thanks Steve, I was wrong it needs to be set to P mode, Screen 2
R3 ~ R5 ~ R6 Mk II ~ R50
Lenses: RF Trinity and others
Adobe and Topaz Suite for post processing
Personal Gallery
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.