01-18-2014 02:20 PM - edited 01-18-2014 02:21 PM
Hi,
I've got this Canon Zoom lens EF 70-300mm on my EOS 6D, connected via EOS Remote Utility on my Macbook Pro running MacOS 10.9.1. Everything is working great, and I'm really impressed by the level of details I can achieve by zooming on the moon:
I thought, that looks really amazing! Imagine what the shot will look like when I snap the actual photo with these settings. And then I obtain this. This is a comparison of the screenshot from Live View-Zoom View (left) and the actual shot (right):
I tried changing the image quality (I tried RAW) to no avail. I don't know where the loss of details comes from, I was wondering if anyone here had any insight on this or ran into similar problems.
Thanks,
Michel
Solved! Go to Solution.
01-19-2014 12:28 AM - edited 01-19-2014 12:29 AM
Can you try and turn off High ISO NR? at ISO 12800, you can lose a lot of detail with NR. The moon is pretty bright, so you don't need that high of an ISO. And the moon should be sharp even at slower shutter speed. So try slower shutter speed, lower ISO, turn off NR. Your shot looks more like Over NR than out of focus or camera shake.
01-18-2014 05:43 PM
what is your capture information (shutter speed, iso, etc.). Did you use tripod? how is the noise reduction setting?
01-18-2014 06:09 PM
01-18-2014 06:34 PM
Thanks for the comments, here's some more information:
- I did use a tripod, it's a Fotopro C5-i,and it was standing on a balcony which is not known for vibrating.
- The capture information is all in the first screenshot: 1/1000 shutter speed, 40 aperture, 12800 ISO speed, autofocus has been turned off, but in EOS Utility, not on the lens itself. I have been adjusting the focus manually in Live View. I guess turning off AF on the lens is something to try.
- High ISO speed NR is set to standard and long exposure noise reduction is off.
- The image in Live View zoom stays clear, before and after taking the shot.
Thanks,
Michel
01-18-2014 06:40 PM
01-18-2014 08:22 PM
01-19-2014 12:28 AM - edited 01-19-2014 12:29 AM
Can you try and turn off High ISO NR? at ISO 12800, you can lose a lot of detail with NR. The moon is pretty bright, so you don't need that high of an ISO. And the moon should be sharp even at slower shutter speed. So try slower shutter speed, lower ISO, turn off NR. Your shot looks more like Over NR than out of focus or camera shake.
01-19-2014 03:34 PM
Thanks to you both! I have a clear sky tonight, I'll give it another shot avoiding these potential pitfalls. I'll let you know how it turns out.
01-20-2014 12:26 AM
Using a lower ISO, and/or disabling the High ISO NR did the trick! Here are the new comparison pictures:
where I used 100 ISO speed, 5.6 aperture, and 1/80 shutter speed, disabled high ISO NR.
Thanks again!
Michel
01-20-2014 05:21 PM
Michel,
Thanks for following through on this. I took your suggestion to turn off High ISO Noise Reduction. The difference is great. I see much more detail in the image. I zoomed in at approximately 350% and there is a lot more detail without HINR. These are both large RAW images so there are a lot of pixels in each. So my assessment is that there is some in-camera processing of RAW images or HINR changes a parameter that controls the CMOS sensor. I had ISO set to 1600 for both images. The noise in both images is similar so at ISO 1600 there is nothing to gain by turning on HINR and much to lose. Thanks again.
Steve
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.