04-18-2023 08:55 PM - last edited on 04-19-2023 10:37 AM by Danny
Just got this new EOS4000 and I need help getting it off of “BASIC MODE” so I can start actually using my camera. Somebody help me out please. Any tips on what to do?
04-18-2023 09:01 PM
There are YouTube videos explaining the exposure triangle relationship. The 3 basic things are ISO, Aperture & Shutter speed. I would learn each of these components separately. Instead of going straight to M (Manual) mode. Then follow along with the video. While making adjustments. I would also learn where all of the necessary buttons and or dials are located on your camera.
04-18-2023 09:06 PM
I’ve used cameras before but this is my first canon. I just want to take it off basic mode so I can use the camera, will doing what you said change the mode?
04-18-2023 09:12 PM
You need to move the mode dial out of green square auto mode. By turning the mode dial to M, Av, TV & P modes. If you want to control the camera settings. The mode dial also serves as the power switch on this camera.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.