06-05-2024
09:28 AM
- last edited on
06-11-2024
09:58 AM
by
Danny
I have 250D camera, I have attached Tamron zoon lense to it. When I click a photo through eye price with full zoom I get a, blank image, but if I shoot with the LCD view I get a picture. What doni do to get a picture through eye piece.
06-05-2024 10:08 AM
Welcome.
When you say Full zoom do you mean the maximum focal length; i.e. with a 100-400 lens at 400mm?
Does this happen at intermediate settings?
Is the camera indicating focus achieved through the viewfinder - the green dot in lower right lights up?
What settings/ mode are you using?
06-05-2024 10:39 AM
It is 18 to 270 and i get this issues once I cross 100. I have used it in P and A setting. This lense is working fine in 450 D model.
06-05-2024 10:59 AM
Welcome.
When you say Full zoom do you mean the maximum focal length; i.e. with a 100-400 lens at 400mm?
Does this happen at intermediate settings?
Is the camera indicating focus achieved through the viewfinder - the green dot in lower right lights up?
What settings/ mode are you using?
06-05-2024 11:02 AM
Is the shutter actuating when in viewfinder mode?
Can you upload one of the blank image files to Dropbox or One Drive so we can examine?
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.