01-07-2024 11:32 AM - last edited on 01-07-2024 12:23 PM by Kristoff
Canon R3. Can anyone please tell me how to totally disable the two smart controllers on the rear of the body? I can't shoot anything while tromping around outdoors without rubbing against them and changing settings I don't intent to. I see where I can assign them different tasks but not how to completely disable them. Thanks
Solved! Go to Solution.
01-08-2024 12:45 AM - edited 01-08-2024 12:47 AM
To supplement Johns post, here is a short Video by Rudy Winston, from Canon, on the smart controller and how to use, enhance, or disable it. If you want to jump right to "disable", scrub to the 2:20 minute mark.
Newton
01-07-2024 03:00 PM
For the 1D X Mark III it's C.Fn-7
Check C. Fn section for the R3.
01-07-2024 03:03 PM
The [LOCK] functionality could be an alternative option.
01-08-2024 12:45 AM - edited 01-08-2024 12:47 AM
To supplement Johns post, here is a short Video by Rudy Winston, from Canon, on the smart controller and how to use, enhance, or disable it. If you want to jump right to "disable", scrub to the 2:20 minute mark.
Newton
01-08-2024 09:51 AM
Thank you!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.