10-20-2020 05:00 PM
Solved! Go to Solution.
10-20-2020 06:56 PM
I think the simple solution is to switch the lens to MF.
Be aware that all STM lenses are "focus by wire". This means the focus ring is not mechanically connected to the internal lens elements. The focus ring sends electronic control signals to the focusing motors. If the metering is not active, then the focus ring will not do anything.
10-21-2020 05:39 AM
No, if you switch the lens to MF then the camera will automatically turn off AF.
10-20-2020 05:19 PM
*Which* 50mm lens?
10-20-2020 05:31 PM
10-20-2020 06:56 PM
I think the simple solution is to switch the lens to MF.
Be aware that all STM lenses are "focus by wire". This means the focus ring is not mechanically connected to the internal lens elements. The focus ring sends electronic control signals to the focusing motors. If the metering is not active, then the focus ring will not do anything.
10-21-2020 12:52 AM
10-21-2020 05:39 AM
No, if you switch the lens to MF then the camera will automatically turn off AF.
10-21-2020 10:52 AM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.