04-02-2024 04:31 AM - edited 04-02-2024 07:18 AM
Hello, I have a Canon EOS 1D Mark II with a WFT-E8B and i want to upload photos directly from the camera to an ftp folder. My camera successfully detects the WFT-E8B wireless transmitter. I can see the Wireless Mac Address in the Function Settings.
The problem is that when I use the connection wizard in the connection settings, I chose FTP trans and when i pick Wireless Lan Type and press ok, the camera hangs on "Busy... Please Wait" screen, even though i am standing next right below the access point.
The FTP trans connection via Wired connection is working properly.
My camera is using Firmware ver 1.1.8
04-02-2024 07:15 AM
Welcome to the forum.
1. You should edit your post and delete camera S/N.
2. Go to the camera support s, register your product and contact Canon for support.
04-04-2024 06:10 AM
Have you tried manually inputting the network name and password rather than using the connection wizard?
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.