02-24-2023 08:56 AM
Hello, i have a Canon A1 that wasnt showing any signs of power even with new batteries. I proceeded to open the top of the camera and the black and orange wires that are under the winding lever have come loose with the brass/copper film that they were connected to. The question being can i fix it with aluminum foil and solder, maybe solder the two wires together and have it basically bypassing the switch and everytime i want to turn it off i need to take the battery off or does it not work like that? I have no knowledge of this electronics
Thanks in advance and please forgive my semi botched english.
02-24-2023 09:39 AM
Greetings,
If the camera has value to you, I'd contact midwestcamera dot com. Probably a simple and inexpensive repair for them and you.
~Rick
Bay Area - CA
~R5 C (1.0.9.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve Studio ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.