07-12-2020 08:00 PM
When I charge the batteries for my RebelT3i, then install them in the camera, the charge level shows at the reduced level. Turns on fine, takes great pictures, but shows low in a few minutes. Help....
Solved! Go to Solution.
07-13-2020 11:52 AM
Judy, what I have read is that you have 4 batteries, 2 of them are new and all four show the same level of charge when placed in the camera and that charge level is less than full. That tells me you either have a bad charger or there is something wrong with the camera. Look at the battery contacts inside the camera, clean them with a q-tip and alcohol.
If that does not help then replace the charger with Canon if possible and purchase it from a store that will accept a return in case the charger does not solve your problem.
Forget about repairing the camera, it would cost twice as much as the camera is worth. If you want to stick to the same model then buy a used working one also from someone or someplace that accepts returns.
07-15-2020 03:02 PM
Yeah, the overwhelming amount of evidence indicates that is OK.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.