cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Back button focus

crewdog
Apprentice

I have two cameras, a Canon 70d and a 5d Mk III.  I also have several lenses, but my 'go to' lens is my EF 100-400 4.5 5.6 L series zoom as I do a lot of aviation photography.  On each of them, I've used metering start/focus (front button) and back button focus (AF ON).  

 

My question is thus:  Why does it take several presses on the back button to achieve focus on subjects well in excess of 6.5 meters to infinity setting (ex:  A bird feeder 30 feet away).  Should it not take just a single press?  

 

I sent the lens to be cleaned and inspected by a company in California about a year ago, which claimed that the lens was working properly and adjusted to 'factory specs'.  This led me to believe the problem was with the Camera (70d).  I recently purchased the 5dM3, and the problem persists.  The batteries on both camera are fully charged, so it's not for lack of power.

Since I do not use my 24-105mm f/4 IS USM for long range photography, I cannot say if happens with that lens as well.

 

crewdog

6 REPLIES 6

jrhoffman75
Legend
Legend

"On each of them, I've used metering start/focus (front button) and back button focus (AF ON).  

 

My question is thus:  Why does it take several presses on the back button to achieve focus"

 

Are you saying the same thing doesn't happen if you use shutter button focus?

 

 

John Hoffman
Conway, NH

1D X Mark III, M200, Many lenses, Pixma PRO-100, Pixma TR8620a, Lr Classic

I will have to re-check, but looking back, it may have been the case with the front button as well.  I have never been really happy with the focus function on these cameras, as I feel that Canon camera lenses have a softer focus than others I've used.

In aviation photography of fast moving fighter aircraft, I never have the time to manually focus, so I depend on autofocus for sharp photos, and rarely is that happening.

There is a lot more than focus for sharp images of fast moving objects:

 

IMG_6622.jpg

 

For this, I think that standard half-press focus on the center point in one-shot mode works best.

Waddizzle
Legend
Legend
You need to press and hold BBF on AI Servo mode.
--------------------------------------------------------
"The right mouse button is your friend."

Thanks for your reply. I believe I was using AI Servo mode, but I will be sure to check at the next opportunity. Again, Thsnks.

Waddizzle
Legend
Legend
“Thanks for your reply. I believe I was using AI Servo mode, but I will be sure to check at the next opportunity.”

I like to save BBF as a custom shooting mode that uses One Shot AF. I save another custom shooting mode that the same button for [AF OFF] for action photography that uses AI Servo mode.
--------------------------------------------------------
"The right mouse button is your friend."
Avatar
Announcements