01-26-2020 12:42 AM - edited 01-26-2020 12:44 AM
I am hoping somebody can help me with an issue I am having with a recently purchased new-to-me Canon 80d camera (purchased from B&H Photo).
When I turn the mode dial to select my desired mode, the display screen does not show what has been selected on the mode dial. Below is a list of what is selected on the mode dial and then the selection displayed.
B -> B
M -> B
Av -> Tv
Tv -> Tv
P -> P
A+ -> P
Flash Off -> P
SCN -> C1 p
Creative filters -> C2 p
C2 -> C2 p
C1 -> C1 p
Has anybody else experienced this problem? Is there a setting that I have not implemented?
I have tried using a brand new SanDisk SD card and updating the firmware on the camera.
04-17-2021 12:53 PM
05-21-2021 08:24 AM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.