10-14-2023 01:55 PM
Hi all, I wasn't able to find this searching the forum. Sadly, she took a drop onto the open SD cover door and now it won't power-on. Unless I'm getting bad info, it appears that replacing the door is extremely involved. Anyone have advice, or guestimates on the repair? It may be a write-off at this point.
Thank you so much,
London
10-14-2023 02:02 PM - edited 10-14-2023 02:03 PM
Greetings,
I parted with my 6D2 on Thursday. It remains one of my all time favorites. She went to a good home. The gentleman who purchased her drove almost 100 miles each way.
This is not a repair you'll want to tackle. Visit My Canon, register the device and start a repair. You'll be given an estimate. You can decide if you want to go forward with the repair.
Sorry for the misfortune. Hope it works out.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
10-14-2023 03:44 PM
Thanks so much Rick
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.