06-23-2013 07:42 PM
We have a Pixma MX 882 - the paper jams as soon as it gets pulled from the bottom try to start the job. We've had it for about a year and love it, haven't had any problems at all. But, now that this has started, it is chronic and is almost impossible to print everything without having it jam several times first! Very frustrating and wasting tons of paper.
06-25-2013 11:57 AM
Hello beki33.
Please try the following to see if we can resolve your issue:
1. Turn the printer off.
2. Unplug the power from the printer for at least 5-10 minutes.
3. While unplugged, remove any paper from the unit.
4. Double check for any obstructions found in the unit or paper paths.
5. If no obstructions are found, plug the power back in and turn the unit on.
If the issue persists, please contact our support group at 1-800-OK-CANON for additional assistance with this issue.
07-01-2013 08:05 PM
This did not help. Just printed a 10 page document... however, a total of 16 pages were used as 6 pages jammed during the printing.
07-02-2013 12:49 AM
Since there are no obstructions, there is likely a hardware issue with the printer that requires service. Please ue the Contact Us link to get in touch with our support staff for available warranty options.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.