cancel
Showing results for 
Search instead for 
Did you mean: 

print head alignment failed ! MG 5422 ...

kalaja
Apprentice

what should I do next ... can't by pass error screen ...please help ... pattern printed ,everything looks good but printer keep saying head allignment failed ..

3 REPLIES 3

Ramona
Authority

Hi kalaja,

 

Do you receive the failed alignment error when trying to perform an automatic print head alignment or a manual print head alignment?

 

If this is a time-sensitive matter, additional support options are available at Contact Us.

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

hi , it's automatic alligment and erorr is something like E 000

Hi kalaja,

 

When you see the error screen, what is the exact error code that appears and what does the message say on the screen of your printer?  If you press the OK button, does this dismiss the error and return you to the HOME screen?  If not, try pressing and holding the STOP button for 5 seconds.  

 

Once you reach the HOME screen, follow the steps in this article from our Knowledge Base to perform a manual alignment.

 

If this didn't work, or if you have any other questions, please feel free to Contact Us!

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x