cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

pixma mx 922 paper only goes half way in then you get an error message. no code numbers.

swedishivy
Apprentice
 
4 REPLIES 4

Patrick
Product Expert
Product Expert

Hi swedishivy,

What is the error that appears on the display of your PIXMA MX922 when you attempt to print?

What is the exact wording of the error that appears on your computer?

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

swedishivy
Apprentice

paper is jammed in the cassette (upper)

remove the paper from the following locations and press ok

paper output slot

transport unit on the rear side

Nothing in the output tray.  How do i get to the rear transport unit?

It has gone completely inside at this point.  Cannot see it from any angle.

Hi,

Please click HERE for the steps to open the rear panel on the printer to check for paper that is jammed. 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer.

swedishivy
Apprentice

Thanks for the answers.  Found the back opening and removed paper from there.  working fine now.  Did not realize it had a back opening.

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!