01-02-2019 04:42 PM
Printer is stuck in copy mode. Anyone else have this problem
01-03-2019 08:45 AM
Hi jps1943,
Your PIXMA MX922 will default to the COPY mode screen, but should change when another mode is selected. If pressing another mode button does not change the screen, try resetting the printer.
You may be able to reset the function and resolve the issue by performing the following:
1. Unplug printer from the electrical outlet.
2. Hold down the power button for 60 seconds.
3. Plug it back in.
4. Power it back on.
If the available options do not change when a different mode button is selected I recommend contacting our telephone or chat support by clicking HERE.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.