Hi i recently got a Prixma 3650s.I've been wanting to use it to print classic game boxes so something that requires a lot of ink, been using it on 300gsm paper(I've also been putting it onto high quality).The first 3 or so images came out fine but af...
Canon TR8622 says ink may have run out. It hasn't. Replaced cartridge. Prints fine on Copy, just won't print from the computer (just sends that "the ink may have run out" message. Anyone know how to fix?
purchased this new. had it about 1 week when it stopped mid-print sesson and turned itself off. if I unplug it and plug it back in, sometimes it briefly turns on then back off. anyone experience this and know how to fix it.
My Canon MG3620 printer has lights that flash green then orange, 7 times. The support article https://support.usa.canon.com/kb/s/article/ART176497 says "Printer error has occurred" and "Service is required." But I can not find the service that is req...
Tried 3 different print heads as that was the original error. Printer will print about half a page before erroring out. It will sporadically print a document when it feels like it.What's most infuriating is that it can and will print a FULL test page...
Opened the scanner menu and hit the drive icon by mistake, now the scanner screen is frozen and I can no longer scan.
I have a Pixma MG8120 color printer. Due to its age, Canon tech support no longer supports it. Their chat line suggested I try this community forum site. The color of my photos were way off. I performed a color test and saw the black and cyan bars di...
I replaced the print head with a new print head. I still get the error message please install the correct print head. As this printer is retired from any Canon support responses, I am turning to the group for advice as to the nest step to get the pri...
A magnet dropped into the rear paper feeder. We got it out but had to disassemble the paper feeder. How does the spring attach? Is there a parts diagram or photo to show it somewhere? Thank you in advance!
I looked through the manual trying to figure out how to check for updates for the IJ Utility and my G7000 printer. After a lot of searching all I found was how to check or get firmware updates IF my G7000 is connected to the internet via a LAN or Wi-...
I have a Canon Pixma G7020 printer. I see the constant message "The latest firmware is on the server. Install the firmware update" on the printer's screen. If I am pressing OK, the message is dissaperaing, but in an hour or two I can see it again. A ...
I have a new Windows 11 system (not an upgrade) and it won't accept the drivers. It wants only 64-bit drivers.I saw a post for about the mx 340 in this section and tried those. They would at least try to load but couldn't detect the printer.I would a...
Successfully installed the Windows 8.1 (x64) driver for the MX860 in Windows 11.Works perfectly directly connected and via Ethernet LAN.I'd wager the same approach will work for Win 10/11 and other Canon support retired PIXMA MX series printers.The M...
Hi, I've been going around and around in circles with my printer all morning. It had disconnected from my wifi - so I reconnect, it says Connected and then it goes right to Setup Fax mode. I don't want to set up the fax, I have no interest in the fax...
