03-06-2019 05:22 PM
Black print is mostly skipped lines. Several deep cleanings do not help. New ink tanks do not help. Color prints all great. Probably need to replace print head.
How do I do that??
03-20-2019 05:04 PM
Mine stop printing and I change the large black ink container and it started working well again... the ink indicator was showing that it was 3/4 full... this might work for you too...
03-29-2019 12:02 PM
Could you reply with the information that is listed on the Black ink cartridge( ink number, where it was made, etc). We would also need to know if you printed a nozzle check as well and if it looks like the picture below or if the grid looks like A or B:
We look forward to your reply.
03-29-2019 09:24 PM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.