03-19-2017 09:57 AM
Hello,
I have a Pixmaix6820 that doesnt print the full image. I'm running it on a MAC (Sierra) and trying to print on kodak glossy photopaper. Everytime I print, the image is scaled up and have all the edges cut off for some reason. The 'scale to fit media' box is ticked and the image is exactly 8.5x11 at 300 dpi. Ive tried making the dpi/image a little smaller, hoping that the 'scale to fit' button would work but the image is still zoomed in.
I had a smaller canon printer before this one and it had no troubles at all so I'm a little frustrated. I'd appreciate any help!
Thank you
Also here are pics of my print settings if that helps at all
04-03-2017 04:20 PM
Hello.
If borderless printing is enabled, the image will be extended beyond the edges of the paper in order to guarantee the edge to edge bleed. To prevent any cut off, you will have to print a "bordered" image instead. This will allow you to retain the entire image.
If additional assistance is needed, find more help at Contact Us.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.