08-29-2018 06:43 AM
Hi,
I could use some help solving the following for my Canon Pixma MG5550 printer:
- Printer is completely dead, no reaction to any button whatsoever
- Orange alarm light is on (contnuously)
Tried:
- Un- and replug power --> no effect
- Hard reset, combination of 2 sec Off-button, On-button, 5x Off --> no effect
- Unplug power and press On-button for a minute --> no effect
Hope someone has a great idea!
Solved! Go to Solution.
08-29-2018 08:49 AM
Hi ThomasBijl,
It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
08-29-2018 08:49 AM
Hi ThomasBijl,
It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
11-28-2019 02:12 PM
Here is what I did:
press on/off button and unplug the power cable (keep button pressed down).
Wait a few seconds.
Switch on the printer.
br
Stefan
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.