cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pixma G3200- No Red Showing up

karyntag
Apprentice

Just purchased a brand new Pixma G3200, got it set up.. it printed a few papers perfectly.. then all of sudden.. the colors started fading out.. after a few more prints.. now it will not print red and all the other colors are extremely faded. The black is fine.  I have tried cleaning.. it does not help and when I print a test sheet... there is no red showing at all on either of the two lines there should be red. How do I fix this?   TIA 

2 ACCEPTED SOLUTIONS

ArthurJ
Product Expert
Product Expert

Hi Karyntag,

 

Since the cleaning did not resolve the issue, I recommend performing a deep cleaning. Please click HERE for the steps.

 

If that does not resolve the issue, troubleshooting with our support group will be needed to narrow down the cause of your issues. Please contact our support group at 1-800-OK-CANON (1-800-652-2666), Monday - Friday, 8:00 AM - 8:00 PM EST(excluding holidays).

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

Yes, a deep cleaning fixed the problem, it works great now. Thank you. 

View solution in original post

2 REPLIES 2

ArthurJ
Product Expert
Product Expert

Hi Karyntag,

 

Since the cleaning did not resolve the issue, I recommend performing a deep cleaning. Please click HERE for the steps.

 

If that does not resolve the issue, troubleshooting with our support group will be needed to narrow down the cause of your issues. Please contact our support group at 1-800-OK-CANON (1-800-652-2666), Monday - Friday, 8:00 AM - 8:00 PM EST(excluding holidays).

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Yes, a deep cleaning fixed the problem, it works great now. Thank you. 

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!