cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pixma Canon M6220 prints blank pages and says I have no ink despite the fact I added new cartridges?

unknown
Apprentice

Pixma Canon M6220 prints blank pages and say I have no ink despite the fact I added new cartridges, help? I have tried inserting and re-inserting them properly and reset the settings once.  Please help.

1 REPLY 1

Karl1
Rising Star

Hi unknown,

 

I recommend performing 2-3 deep cleanings to try and resolve the issue.  Use the following steps to deep clean the print head:

 

. Make sure that the power is turned on.

 

 

2. Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in the cassette.

 

 

3. Open the paper output tray gently, and open the output tray extension.
IMPORTANT

 

  • If the inner cover is open, close it.

 

 

 

4. Clean the print head deeply.

 

(1) Select  Setup on the HOME screen.

 

The setup menu screen will appear.

 

(2) Select  Maintenance, then touch the OK button.

 

The Maintenance screen will appear.

 

(3) Select Deep cleaning, then touch the OK button.

 

 

The confirmation screen will appear.

 

(4) Select Yes, then touch the OK button.

 

The machine starts cleaning the print head deeply.

 

Do not perform any other operations until the machine completes the deep cleaning of the print head. This takes about 2 minutes.

 

The pattern print confirmation screen will appear.

 

(5) Select Yes, then touch the OK button.

 

The nozzle check pattern will be printed.

 

(6) When the completion message appears, touch the OK button.

 

The screen will return to the Maintenance screen.
 
If the issue persists, I recommend using the Contact Us link to get in touch with our live support who can provide any applicable warranty options.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.