cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Paintshop Pro can't detect MX870 scanner

Orthoducks
Contributor

I have a Canon MX870 printer which I use from a Windows 7 Professional system. The printer properties dialog says that the driver is "The Device Stage(TM) for Canon MX870 series Version 1.1.30." I got this driver from Canon's support site at the recommendation of a Canon representative because I need to define multiple devices that operate the printer with different default settings, and the driver that Microsoft provides does not allow that.

I just installed the 64-bit version of Paintshop Pro X6 on my computer and tried to use it to scan an image. The "select TWAIN source" dialog lists no devices.

I know the printer's scanner function is working because I use it from Irfanview all the time. When I installed Irfanview it even selected the correct source automatically.

I researched this on Corel's user forum. The most likely explanation seems to be that the driver I'm using follows the 32-bit TWAIN standard, and the 64-bit version of Paintshop Pro only operates with drivers that use the 64-bit standard.

So, I have two questions.

1. Does the driver I'm using support only the 32-bit TWAIN standard?

2. If so, what can I do about it? I need the multiple-profile capability that this driver gives me, and downgrading Paintshop Pro to the 32-bit version sounds like a "cure worse than disease" solution.

 

3. If not, what else might be going wrong?

2 REPLIES 2

CrusaderDriver
Contributor

This seems to be a bug is PSP X6 64bit.  It will not recognize the canon scanner driver (no matter which, I have an MX920 and Scanjet 5600).  I was hoping the PSP update would solve it, but no such luck.  When I scan, I use PSP X6 32bit.  The scanner usually shows up as a twain device.

Paintshop Pro has been a big disappointment. My old copy loaded fast, was easy to use, and offered me a bit more image manipulating power than Irfanview. It did everything I wanted, but it was almost old enough to vote, and it wouldn't run under Windows 7.

 

The new version is a bloated monster that takes forever to load, has the same confusing monochrome look as Photoshop, and offers just as many features that look to be just as hard to learn.

 

Darn it, Corel, if I wanted the power and headaches of using Photoshop, I would have bought Photoshop.

 

And now I learn that it won't even talk to my scanner.

 

I wonder if digital downloads can be returned.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.