02-09-2023 09:18 PM - last edited on 02-10-2023 09:37 AM by Danny
I have PIXMA iP8720 printer that prints double lines for text. The print out for the nozzle check shows the PGBK lines horizontal OK, the vertical lines start OK then split into two lines for most of the chart then merge back to a single line at the end.there are no gaps in anywhere in the total pattern, just the vertical lines separating and then going back together. I have done all of the maintenance options in the driver. If I print documents in photo mode there is no problem.
02-13-2023 03:31 PM
You can try cleaning the encoder strip inside the printer. Please click HERE for the steps.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.