PIXMA TR4722 printer goes to pause and ejects paper

[DerrickL]

Possible Causes for TR4722 Printer Issues

Paper Jam

• Stuck Paper: Check for any paper that may be jammed inside the printer. Even small pieces can cause issues.
• Incorrect Paper Loading: Ensure that the paper is loaded correctly in the tray.

Sensor Malfunction

• Misaligned Sensors: The printer may be detecting a paper jam due to a malfunctioning sensor. This can happen if the sensor lever is stuck or bent.
• Physical Inspection: You can check the sensor by looking for it near the paper feed tray. Use a flashlight to see if it is obstructed or misaligned.

Troubleshooting Steps

1. Inspect for Paper: Open the printer and carefully remove any visible paper jams.
2. Check the Sensors:
   • Locate the sensor near the feed rollers.
   • Ensure it is straight and not obstructed.
3. Reset the Printer: Turn off the printer, wait a moment, and then turn it back on to see if the issue resolves.

Additional Tips

• Manual Feed Test: Try manually feeding a piece of card into the printer to see if it clears the error.
• Pause and Resume Printing: If the printer is paused, go to the print queue and resume printing after checking for jams.