cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA MX922 Weird Error Msg

Doremus
Apprentice

In last month after login to PC Windows 10 connected to above printer.

 

printer was formerly connected to a Windows PC Running Windows 7.

 

Now a few months later my Windows Pc with W-10 after it boots up

give me and error box Top Left Corner says "Canon Image Garden"

Yhis white error box has a RED Circle with a White X and states

A required file may have been deleted or damaged.Reinstall the software.

 

I have reinstalled the software from the original disk 2 times.

 

The error msg comes up, click X to exit, it replicates the msg again and

again for 5-6 error boxes. FRUSTRATING. Will not tell me what file is missing or

damaged !

 

Tried to call Canon tech support and they tell me must reapply for registration and it

will cost me $19.99 to get a tech to help  AARRGGH!!

1 REPLY 1

Patrick
Product Expert
Product Expert

Hi Doremus,

 

Please follow these steps:

 

1.  Please press the Windows key on your keyboard and the letter R, then let both go.

 

2.  In the Run window that appears, please type CONTROL and click OK.

 

3.  In Control Panel, please click on Uninstall a program (or Programs and features depending on your view)

 

4.  In the list that appears, click on Canon My Image Garden and then Uninstall at the top.

 

5.  Follow the on-screen prompts to uninstall My Image Garden.

 

Once uninstalled, please reboot your computer.

 

When the computer restarts, does the error appear?

 

If not, please use the link below to download and install the latest version of My Image Garden:

 

https://www.usa.canon.com/internet/portal/us/home/support/details/printers/inkjet-multifunction/mx-s...

 

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!