06-16-2022 02:23 PM - last edited on 06-23-2022 01:51 PM by Danny
old comp died. downloaded canon pixma drivers on new comp. i can print directly from the printer. if i print something from the comp the printer physically "prints" but the result is a blank page. if i scan i get the mssg: ubs is disconnected or the printer is off. connected and on.
??? ty
06-16-2022 02:38 PM
Hi!
To have a better understanding of your issue, please let everyone know the model of the printer you have and the operating system on your computer.
If this is a time-sensitive matter, please check out your other support options here: https://canon.us/MyCanonAccount
Thanks!
06-16-2022 04:18 PM
pixma mx490 and windows 11
06-17-2022 11:44 AM
lost reply?
pixma mx490 ty
06-17-2022 11:44 AM
ps windows 11 ty
06-17-2022 11:53 AM
Hi, yuri10!
Thanks for posting on our forum! This community is designed for your fellow Canon owners to help each other out with any problems they may encounter. If this is a time-sensitive matter, click HERE search our knowledge base or register your Canon gear HERE to access additional support options.
Thanks and have a great day!
06-24-2022 02:04 PM
hey danny, i might as well try you. am i being "shunnerd" by the community?cancelled? here's my response to samantha from days ago. no response. i've put in new posts. nothing. pixma 490/windows 11.
hello samantha. where did you go? still trying to fix my problem with a pixma mx490/windows 11. downloaded the driver onto my new comp. i can print directly from the printer. scan gets me the error: ubs cable not connected- it is, printer not on- it is. if i tried to print from the comp the printer would print but spit out a blank page.
dad suggested i use the microsoft driver so i switched. same issues except that if i try to print from the comp, go to the print set-up page and click print it takes me to save as. reloaded canon drivers. no good. help. ty
06-24-2022 02:14 PM
Samantha and I are moderators. We're not qualified to address technical issues. Product Expert Arthur_J replied to another one of your posts farther down in this thread, so we recommend directing your technical questions to him.
Hope this helps!
06-20-2022 01:50 PM
hello samantha. where did you go? still trying to fix my problem with a pixma mx490/windows 11. downloaded the driver onto my new comp. i can print directly from the printer. scan gets me the error: ubs cable not connected- it is, printer not on- it is. if i tried to print from the comp the printer would print but spit out a blank page.
dad suggested i use the micro soft driver so i switched. same issues except that if i try to print from the comp, go to the print set-up page and click print it takes me to save as. help. ty
06-18-2022 02:14 PM
2nd attempt
pixma mx490 and windows 11
comp died. downloaded driver to new comp. i can print from the printer directly. trying to scan i get: "printer off or usb cable not connected." if i try to print from the comp the printer "prints" a blank page.
?? TY
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.