11-30-2022 08:17 AM - last edited on 11-30-2022 09:04 AM by Danny
I have a Canon PIXMA MX320, facing Error 5100 and tried hard reset, cleaning the Encoder(timing) strip, nothing jammed in paper. Please guide me what can be done further?? As due to this error I am unable scan as well!
11-30-2022 08:56 AM
Jam, dirty encoder strip, reset...
The last item usually at fault can be something keeping the ink carrier from moving freely. Be sure to inspect the carrier assembly for any obstructions by lifting the cover and watching as it moves. You can try removing and reseating the inks. If you are not using Canon branded ink cartridges, this too may cause problems.
Bay Area - CA
~R5 C (188.8.131.52) ~RF Trinity, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It
11-30-2022 01:58 PM
Alright, Thanks Alot, I will give it a try and get back!
03/02/2023: New Firmware Updates Are Available:EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.