11-30-2022 08:17 AM - last edited on 11-30-2022 09:04 AM by Danny
Hello Everyone,
I have a Canon PIXMA MX320, facing Error 5100 and tried hard reset, cleaning the Encoder(timing) strip, nothing jammed in paper. Please guide me what can be done further?? As due to this error I am unable scan as well!
11-30-2022 08:56 AM
Greetings,
Jam, dirty encoder strip, reset...
The last item usually at fault can be something keeping the ink carrier from moving freely. Be sure to inspect the carrier assembly for any obstructions by lifting the cover and watching as it moves. You can try removing and reseating the inks. If you are not using Canon branded ink cartridges, this too may cause problems.
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
11-30-2022 01:58 PM
Alright, Thanks Alot, I will give it a try and get back!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.