02-04-2023 03:21 PM - last edited on 02-04-2023 03:28 PM by Danny
We installed a new Fine Pixma 245 black cartridge in Model MG2522 and followed all procedures but when we printed out alignment page it was missing some black areas and amber light still on for black ink. When trying to print it states the printer is performing another duty and our power light is intermittently flashing with stalls after 2 flashes?
02-07-2023 02:21 PM
When the 2 flash error appears, reload the paper in the rear tray and press the Black or Color button to resume printing.
If that does not resolve you issue, cancel the print and then while the printer is on, unplug the power cord from the printer. While the power is off, press the power button 5 times. After 60 seconds plug the power cord back in and power on the printer.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
02-07-2023 02:51 PM
Thank you Arthur for responding to my dilemma. It has turned out that I apparently bought a defective cartridge as I received a new cartridge from the Canon support team and have just installed the new cartridge and it worked like a dream.
My initial inquiry should have been more clear as I did not receive the 2 flash error, the black ink low indicator light was what I was referring to as it had always stayed on after the installation procedures.
I am happy to have this resolved
03/02/2023: New Firmware Updates Are Available:EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.