05-20-2022 07:35 PM - last edited on 05-21-2022 08:33 AM by Danny
printer states "The printer is performing another operation" but it's brand new and just installed. Any suggestions?
05-25-2022 03:37 PM
Hi nancydussault,
Are you using your PIXMA G3202 wirelessly?Or with a USB cable?
What version of Windows are you using?If you are using a Mac, what version of OSX is installed?
Is the error light blinking on your printer? If it is, how many times does it blink before there is a pause?
https://ij.manual.canon/ij/webmanual/ErrorCode/G3000%20series/EN/ERR/err_ug_message01_0100.html?ref=...
05/13/2026: New firmware updates are available.
EOS R3 - Version 2.1.0
EOS R1 - Version 1.3.0
EOS R5 Mark II - Version 1.3.0
EOS R6 Mark II - Version 1.7.0
EOS R8 - Version 1.6.0
EOS R10 - Version 1.8.0
EOS R100 - Version 1.3.0
EOS R50V - Version 1.2.0
PowerShot V1 - Version 1.2.0
03/17/2026: New firmware updates are available.
EOS R7 - Version 1.8.0
EOS R50 - Version 1.5.0
SELPHY CP1500 - Version 1.0.7.0
PowerShot V10 - Version 1.5.0
01/20/2026: New firmware updates are available.
EOS C70 - Version 1.1.3.1
EOS C80 - Version 1.0.5.1
EOS C400 - Version 1.0.8.1
XF605 - Version 1.0.8.1
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
