12-20-2023
02:34 PM
- last edited on
12-20-2023
02:38 PM
by
Danny
My PIXMA MX892 is still in perfect condition. I know it is connected to my Computer....the ink cartridges are new and Canon specific to this printer. It will go through the entire print process to print but what comes out is blank. Please help figure out what has happened. Thanks
12-20-2023 02:39 PM
Thanks for letting us know what Canon product you've got. The PIXMA MX892 is an older model which we have retired. While that means that Canon USA no longer offers direct support for it, your friends here in the Canon Community are welcome to offer suggestions!
You can also speak with a Canon Upgrade Program specialist to help you score a modern replacement that would meet your current needs at a discount. You can reach them weekdays and Saturdays at 1-866-443-8002.
Hope this helps!
12-22-2023 11:59 AM
It sounds like your printer is doing the same thing my MX922 was doing. I tried everything I could to solve this but in the end I used the “ Reset Everything” option in the system Configuration area. My guess is that during a firmware/os update the printer got “stupid” and the reset function refreshed the OS and solved the problem. I do have the Auto Update turned on so I’m assuming the problem happened during that last update. Good luck.
12-22-2023 07:41 PM
You are my hero 🙂 Worked like a charm. Thanks so much! Wishing you and yours a wonderful holiday!
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.