cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX922 recently started printing reports. How do I make it stop?

burgy00
Apprentice

Have an MX922 All In One. A few days ago is started printing reports that I am not requesting. How do I make it stop? Have been unable to find the setting which controls reports.

1 ACCEPTED SOLUTION

Ramona
Authority

Hi burgy00,

 

To disable the report printing setting, please follow these steps from the printer's operation panel:

 

1. Make sure that the machine is turned on.

2. Press the MENU button. The menu screen is displayed.

3. Select Setup, then press the OK button.

4. Select Device settings, then press the OK button.

5. Select FAX settings, then press the OK button.

6.  Select AUTO PRINT SETTINGS, then press the OK button.

7.  Select Activity Report, then press the OK button.

8.  Select Do Not Print, then press the OK button.

 

Hope this helps!

 

This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

2 REPLIES 2

Ramona
Authority

Hi burgy00,

 

To disable the report printing setting, please follow these steps from the printer's operation panel:

 

1. Make sure that the machine is turned on.

2. Press the MENU button. The menu screen is displayed.

3. Select Setup, then press the OK button.

4. Select Device settings, then press the OK button.

5. Select FAX settings, then press the OK button.

6.  Select AUTO PRINT SETTINGS, then press the OK button.

7.  Select Activity Report, then press the OK button.

8.  Select Do Not Print, then press the OK button.

 

Hope this helps!

 

This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Thanks! This cured my printer!

 

Avatar
Announcements